2023 VANGUARD MAXCUBE Air Ride Dry Van Trailer For Sale

Contact Information

No ETA at this time.
2023 Vanguard MaxCube
Width: 102-5/16"
Length: 53' 0" (52' 6" inside with swing doors, 52' 5" with OHD)
Height: 13' 6" (110" inside)
Weight +/- 3%: 14,158 lbs
Door Opening: 110" tall x 99" wide
Door Type: 1/2" Composite pp white galvanized inner and outer panels
Door Holdbacks: Rubber bumper on bottom hinge, chain and loop on door with hook recessed into base rail.
Inside Width: 101" post to post
Upper Coupler Height: 47-3/16" with ultra high strength approach plate and 1/4" 67K bottom plate. Approach plate extends up front of trailer 2-1/4" creating approximately 1/2" thick fifthwheel impact area. Galvanized front lip.
King Pin Location: 36"
Tire / Wheel Size: 295/75R22.5 / 8.25 x 22.5
Tire Make: Cooper PRO Series LHT radial. Smartway approved new
Tire Inflation System: None
Wheel Type: 2HH disc powder coated Gray.
Hubo on Bracket: None
Outboard Cast Drums: Yes, machine balanced. Long studs.
Number of Axles: Two
Axle Make: As provided with suspension. Extended life brake lining. Tapered spindle.
Wheel Seals: Stemco Guardian HP seals.
Bearing Lubrication: HEARTLAND #0 SYN-POLY SEMI-FLUID GREASE
Spindle Nut: ZIP-Torq
Hubcaps: Stemco vented. Stemco Platinum Performance Plus System (5 year limited warranty)
Suspension: Holland CBX40 AeroBeam with PosiLok and AiRelease (air assisted pin puller)
Tandem Slide: 49" spread 216" slide rails (72" to 174" slide range) (Note: Vanguard standard Holland slide rails specified with 6" center hole spacing with 1.56" hole diameter)
Brake Size & Type: 16.5" x 7" Air "S" - Cam
Air Lines: 3/8" diameter front to rear
ABS: BENDIX 2S-1M with Bendix SR-5 spring brake release valve.
Slack Adjusters: WABCO automatic (5 year limited warranty) new
Brake Chambers: Haldex Gold Seal (4 year limited warranty) Includes brake stroke indicator.
Landing Gear: Jost Magnum A450.G3.17.73 Galvanized bracing. 103" from KP. (10 yr warranty)
Landing Gear Crank Roadside: Yes
Tire Carrier: No
Crossmembers: 4" I-Beam 12" O/C. 7 crossmembers over LG.
X-member to Base Rail Attachment: Aluminum squeeze rivets. 9mil black vinyl tape installed full height of base rail between crossmembers and base rail for electrolysis barrier.
Floor: 1-3/8" Rockland with Floor Saver 100% Oak with three 5/16" screws per board
Threshold Plate: Heavy duty galvanized unitized forklift package and rear sill last 27" of trailer
Scuff Band Sides: 12" x 80KSI corrugated steel attached directly to side post
Scuff Band Front: None
Internal Bulkhead: 10ga x 12" smooth steel attached directly to front wall posts
Sidewall Liner: Impact resistant polypropylene recessed between posts with no fasteners
Nose Liner: .180 Ridge OGRE full height with close out at bottom in lieu of 1/2" plywood.
Ceiling Liner: None
Side Panels: .050 aluminum pp white
Side Posts: 14ga x .531" MaxCube style series "A" logistic posts on 16" centers throughout
Front Wall Panels: PPW Aluminum with 1/8" mill finish aluminum radius panels.
Front Wall Posts: FIVE 2" deep hat section posts
Roof Bows: 1" deep galvanized steel anti-snag on 16" / 24" centers
Roof Material: .040 Aluminum pre-bonded to bows prior to installation
Rear Frame Color: GALVANIZED
Midcam Lock: No
Lock Rods per Door: One
Hinges per Door: Five
Rubber Dock Bumpers: One pair (4-hole) recessed between lights
Rear Impact Guard (RIG): Reinforced for Dock-Lock operation. GALVANIZED. (outboard verticals). Vanguard has earned the Insurance Institute for Highway Safety's TOUGHGUARD award for having a rear guard that helps to prevent underride of a midsize car traveling 35 MPH in three test modes -- full-width, 50 percent overlap and 30 percent overlap. ALL RIG parts are bolt on.
Flaps Mtd. to Slider: Yes 24" x 27-1/2" white antispray with Vanguard logo.
Sealed Beam Lights: Optronics LED (Limited Lifetime Warranty) All Locations including license. Canada and California legal lights. Five lights rear header. Front and rear header lights with multi-function. GloLights at rear and mid-turn. Lower lights attached with aluminum closed end pop rivet for anti theft.
Wiring Harness: Phillips split wiring harness with internal ground. (10 year warranty)
7-Way Receptacle: Phillips Q-Box (split pin without circuit breakers). Non corrosive housing.
Gladhands: Phillips annodized with screens, non swivel type offset to roadside. REAR ACCESS MOUNT.
Registration Holder: Truck-Lite 97960 or Phillips 16-802 or Optronics (factory choice)
Vents: None
Side Skirts: None
External Rub Rail: None
Undercoating: Pre-undercoated crossmembers and floor. Holland landing gear and suspensions have Black Armour coating. Hendrickson suspensions have black soft coat. Slide rails are sprayed with undercoat and inside of coupler is sprayed.
NOT ACTUAL PHOTOS
NOTE: The above specification is not designed or rated for "Sidewall Loading" such as carpet or tires.
Improper loading will result in a reduced trailer life. Specifications to accommodate this type of loading are available from the factory upon request.